Moxa Technologies VPort 25 Manual do Utilizador

Moxa VPort 26A-1MP User’s Manual First Edition, March 2013 www.moxa.com/product © 2013 Moxa Inc. All rights reserved.

Moxa VPort 26A-1MP Introduction 1-5 Product Features High Video Image Quality • 1/2.7” progressive CMOS sensor for HD (1280 x 720) resolution • Da

Moxa VPort 26A-1MP Introduction 1-6 • 24 MB video buffer for pre-event snapshot images • Sequential snapshot images supported • Supports SDHC slo

Moxa VPort 26A-1MP Introduction 1-7 Product Description Form Factor IP Camera Module

Moxa VPort 26A-1MP Introduction 1-8 Vari-focal Lens The VPort 26A-1MP series comes with a day and night 3to 9mm megapixel lens for providing high q

Moxa VPort 26A-1MP Introduction 1-9 9-pin Terminal Block Connector for DI, DO, and Audio The VPort 26A-1MP supports 1 DI (digital input), 1 DO (rel

Moxa VPort 26A-1MP Introduction 1-10 NOTE The VPort 26A-1MP supports a standard SDHC interface. Users can use SD cards suitable for this specificati

2 2. Getting Started This chapter includes information about how to install a VPort 26A-1MP IP camera. The following topics are covered in this chap

Moxa VPort 26A-1MP Getting Started 2-2 Before Getting Started In what follows, “user” refers to those who can access the IP camera, and “administrat

Moxa VPort 26A-1MP Getting Started 2-3 Step 3: Connect the cables. a) Open the conduit hole. (use the side conduit hole as example) b) Prepare the

Moxa VPort 26A-1MP Getting Started 2-4 d) Connect the cables to the IP camera module’s connectors. Connect the Ethernet cable to RJ45 Ethernet port,

Moxa VPort 26A-1MP User’s Manual The software described in this manual is furnished under a license agreement and may be used only in accordance with

Moxa VPort 26A-1MP Getting Started 2-5 Step 4: Mount the bottom case on the ceiling or accessory’s mounting kit (VP-MK2) a) Mounting on the ceiling

Moxa VPort 26A-1MP Getting Started 2-6 Step 5: Assemble the IP Camera Module with the bottom case. Step 6: To get the desired video image, adjust t

Moxa VPort 26A-1MP Getting Started 2-7 NOTE After adjusting the PAN, TILT, and ROTATE positions, tighten all of the screws to ensure that the orient

Moxa VPort 26A-1MP Getting Started 2-8 3. Users can double click the selected VPort, or use the IE web browser to access the VPort’s web-based mana

Moxa VPort 26A-1MP Getting Started 2-9 Step 5: Access the VPort system configuration. Click on System Configuration to display a system overview. Th

Moxa VPort 26A-1MP Getting Started 2-10 Wiring Requirements ATTENTION Be sure to disconnect the power cord before installing and/or wiring your Mox

3 3. Accessing the VPort 26A-1MP’s Web-based Manager This chapter includes information about how to access the VPort 26A-1MP IP camera for the first

Moxa VPort 26A-1MP Accessing the VPort 26A-1MP’s Web-based Manager 3-2 Functions Featured on the VPort’s Web Homepage The homepage of the VPort’s we

Moxa VPort 26A-1MP Accessing the VPort 26A-1MP’s Web-based Manager 3-3 Audio Control The VPort 26A-1MP provides both audio input and audio output fo

Moxa VPort 26A-1MP Accessing the VPort 26A-1MP’s Web-based Manager 3-4 System Configuration A button or text link on the left side of the system con

Before Getting Started Before using your VPort 26A-1MP, please pay close attention to the following instructions:  After opening the VPort 26A-1MP

4 4. System Configuration After installing the hardware, the next step is to configure the VPort 26A-1MP’s settings. Users can configure by web cons

Moxa VPort 26A-1MP System Configuration 4-2 System Configuration by Web Console System configuration can be done remotely with Internet Explorer. To

Moxa VPort 26A-1MP System Configuration 4-3 This table can also be found on the System Configuration  Overview webpage. System General Settings On

Moxa VPort 26A-1MP System Configuration 4-4 Server Contact Setting Description Default Max. 40 characters Edit the responsible operator for this

Moxa VPort 26A-1MP System Configuration 4-5 Admin password Setting Description Default Admin Password (8 to 15 characters) The administrator can t

Moxa VPort 26A-1MP System Configuration 4-6 Recording Stream Setting Description Default Stream 2: H.264 or Stream 2: MJPEG Select the H.264 or MJ

Moxa VPort 26A-1MP System Configuration 4-7 Send to system log server Setting Description Default Send to system log server Enables sending the sy

Moxa VPort 26A-1MP System Configuration 4-8 Firmware Upgrade Take the following steps to upgrade the firmware: Step 1: Press the Browse button to s

Moxa VPort 26A-1MP System Configuration 4-9 Network General Network Settings The General Network Settings page includes some basic but important net

Moxa VPort 26A-1MP System Configuration 4-10 Auto Configuration In a mass installation, it is time consuming to configure each of the many devices o

Table of Contents 1. Introduction ...

Moxa VPort 26A-1MP System Configuration 4-11 General Settings Setting Description Default IP address Variable IP assigned automatically by the DHC

Moxa VPort 26A-1MP System Configuration 4-12 The VLC media player is used here as an example of a RTSP streaming application: Step 1: Open VLC Playe

Moxa VPort 26A-1MP System Configuration 4-13 Step 3: Wait a few seconds for VLC Player to establish the connection. Step 4: After the connection has

Moxa VPort 26A-1MP System Configuration 4-14 SMTP Server and Email Account Settings The VPort not only plays the role of a server, but can also conn

Moxa VPort 26A-1MP System Configuration 4-15 Dynamic DNS DDNS (Dynamic Domain Name System) is a combination of DHCP, DNS, and client registration. D

Moxa VPort 26A-1MP System Configuration 4-16 Setting Description Default Enable UPnP Enable or disable the UPnP function. Enable QoS (ToS) Quali

Moxa VPort 26A-1MP System Configuration 4-17 1st FTP Server Setting Description Default 1st FTP server FTP server’s IP address or URL address. N

Moxa VPort 26A-1MP System Configuration 4-18 network with heavy traffic. IGMP provides the ability to prune multicast traffic so that it travels onl

Moxa VPort 26A-1MP System Configuration 4-19 HTTP Event Server The VPort can send the customized alarm actions and messages to the HTTP Event Server

Moxa VPort 26A-1MP System Configuration 4-20 Accessible IP List The VPort uses an IP address-based filtering method to control access to the VPort.

Alarm ... 4-35 Syst

Moxa VPort 26A-1MP System Configuration 4-21 SNMP The VPort 26A-1MP supports three SNMP protocols. The available protocols are SNMP V1, SNMP V2c, an

Moxa VPort 26A-1MP System Configuration 4-22 SNMP Read/ Write Settings SNMP Versions Setting Description Default V1, V2c, V3 Select SNMP protocol

Moxa VPort 26A-1MP System Configuration 4-23 User Data Encryption Key (For SNMP V1, V2c, V3 and V3 only) Setting Description Default Enable 8-cha

Moxa VPort 26A-1MP System Configuration 4-24 Once the Http Alarm is triggered, the VPort will send the following HTTP commands to the HTTP event ser

Moxa VPort 26A-1MP System Configuration 4-25 EAP-PEAP/MSCHAPv2 EAP-TLS NOTE Please consult an expert or your network administrator for the configu

Moxa VPort 26A-1MP System Configuration 4-26 LLDP LLDP is an OSI Layer 2 protocol defined by IEEE 802.11AB. LLDP standardizes the self-identificatio

Moxa VPort 26A-1MP System Configuration 4-27 Image Appearance Setting Description Default Image Information To determine what style of image inf

Moxa VPort 26A-1MP System Configuration 4-28 Image Adjustment Setting Description Default Saturation Tune the image attribute for the user’s pref

Moxa VPort 26A-1MP System Configuration 4-29 Auto Exposure Shutter Setting Description Default Auto Level Higher level will extend auto shutter

Moxa VPort 26A-1MP System Configuration 4-30 Privacy mask VPort IP camera supports up to3 privacy mask areas on image for privacy protection. Pri

1 1. Introduction The VPort 26A-1MP is a rugged IP camera designed for use in harsh environments. In addition to being able to handle basic video fe

Moxa VPort 26A-1MP System Configuration 4-31 Resolution Type For meeting different CCTV resolution requirement, there are NTSC or PAL mode can be se

Moxa VPort 26A-1MP System Configuration 4-32 Video Quality Control Video Quality Control is used to optimize the bandwidth of the MPEG4 video stream

Moxa VPort 26A-1MP System Configuration 4-33 Audio Audio Source The VPort supports real-time and synchronous video/audio transmission. The default a

Moxa VPort 26A-1MP System Configuration 4-34 NOTE Direction button in the wheel will not be displayed until digital zoom is performed. Once camera i

Moxa VPort 26A-1MP System Configuration 4-35 Conditions The administrator can set up DynaStream’s trigger conditions for facilitating automatic fram

Moxa VPort 26A-1MP System Configuration 4-36 NOTE For the VPort P26A-1MP, the PoE model is powered via the Ethernet cable, so once the network cabl

Moxa VPort 26A-1MP System Configuration 4-37 Suffix of Image File Name in FTP and Mail attachment The snapshot images can be sent either by email or

Moxa VPort 26A-1MP System Configuration 4-38 NOTE The applications described in the following sections will only work properly if either Event Alarm

Moxa VPort 26A-1MP System Configuration 4-39 Digital Input Setting Description Default Enable digital input alarm Enable or disable the digital i

Moxa VPort 26A-1MP System Configuration 4-40 Motion Detection Video Motion Detection (VMD) is an intelligent event alarm for video surveillance netw

Moxa VPort 26A-1MP Introduction 1-2 Overview The VPort 26A-1MP is a vandal-proof, IP66-rated, fixed dome HD IP camera for use in harsh, outdoor envi

Moxa VPort 26A-1MP System Configuration 4-41 NOTE Once the Show alert on the image when VMD is triggered is enabled, the red frames that appear on t

Moxa VPort 26A-1MP System Configuration 4-42 NOTE After setting the VMD Alarm, click the Save button to save the changes Trigger Conditions and Act

Moxa VPort 26A-1MP System Configuration 4-43 NOTE Video Motion Detection is provided as a reference because it is environment-dependent. When the se

Moxa VPort 26A-1MP System Configuration 4-44 HTTP Action Setting Setting Description Default Server 1, 2, 3, 4 Select the HTTP event server for s

Moxa VPort 26A-1MP System Configuration 4-45 HTTP Action Setting Setting Description Default Server 1, 2, 3, 4 Select the HTTP event server for s

A A. Frequently Asked Questions Q: What if I forget my password? A: Every access to the IP camera needs authentication, unless the admin password is

Moxa VPort 26A-1MP Frequently Asked Questions A-2 Q: How can I keep the IP camera as private as possible? A: The IP camera is designed for surveilla

B B. Modbus Address Table Read/Write Registers (Support Function Code 4 & Function Code 3) Address Access Data Type Description System Inform

Moxa VPort 26A-1MP Modbus Address Table B-2 0x0055 R 3 word Ethernet MAC Address Ex: MAC = 00-01-02-03-04-05 Word 0 Hi byte = 0x00 Word 0 Lo

C C. Time Zone Table The hour offsets for different time zones are shown below. You will need this information when setting the time zone in automat

Moxa VPort 26A-1MP Introduction 1-3 CBR Pro™ for no video image packet loss when bandwidth is limited An innovative CBR Pro™ function, where CBR sta

Moxa VPort 26A-1MP Time Zone Table C-2 (GMT+03:00) Kuwait, Riyadh (GMT+03:00) Moscow, St. Petersburg, Volgograd (GMT+03:00) Nairobi (GMT+03:30)

D D. Technical Specifications Camera Sensor: 1/2.7” HD progressive scan CMOS Lens: Focal length = 3 to 9 mm, F = 1.2 Auto Iris Type: DC drive Camera

Moxa VPort 26A-1MP Technical Specifications D-2 Video Viewing: • DynaStream™ supported for changing the video frame rate automatically • CBR Pro™ fo

Moxa VPort 26A-1MP Technical Specifications D-3 Security Password: User level password protection Filtering: By IP address Authentication: 802.1X En

Moxa VPort 26A-1MP Introduction 1-4 Weekly schedule for automated surveillance The user-defined time period will check security settings on a weekly