Moxa-technologies UC-7110 Manual do Utilizador descarregar pdf (Página 19)

UC-7110 Series User’s Manual Getting Started

2-3

Telnet

If you know at least one of the

two IP addresses and netmasks,

then you can use Telnet to

connect to UC-7110’s console.

Default IP Address Default Netmask

LAN 1

192.168.3.127 255.255.255.0

LAN 2

192.168.4.127 255.255.255.0

Telnet can be used locally by using a cross-over Ethernet cable to connect your computer to

UC-7110, or over a LAN or the Internet. The default IP addresses and netmasks are shown above.

To login, type the Login name and password as requested. The defaults are:

Password: root

Once you reach the “Sash command shell” you can proceed to configure UC-7110’s network

settings, as described in the next section.

ATTENTION

y Serial Console Reminder: Remember to choose VT100 as the terminal type. Use the

CBL-RJ45F9-150 cable that comes with UC-7110 to connect to the serial console port. If

you do not get connected on the first try, unplug and then re-plug UC-7110’s power cord.

y Telnet Reminder: When connecting to UC-7110 over a LAN, you must configure your

PC’s Ethernet card to be on the same subnet as the UC-7110 you wish to contact.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 63 64

Sem comentários

Moxa-technologies UC-7110 Manual do Utilizador Página 19