Moxa Technologies Moxa Smartio C168H Manual do Utilizador descarregar pdf (Página 51)

Software Installation

Smartio C168H/HS User’s Manual 3-29

Basic Configuration

In the [Basic configuration] dialog, users can set base I/O address and interrupt,

which should be the same as the hardware configuration of the boards.

Kernel

rebuilding

is required if any setting is changed.

In [getty Setting] sub-dialog, there is one noticeable field:

Non-Modem and Modem Baud Rate

This field stands for the initial baud rate symbol and hunt sequence for Non-Modem

/Modem tty. It is simply for setting parameters of getty entries in system file

/etc/inittab which could also be manually modified by system administrator. Its

value comes from the UNIX system “getty default” file, i.e., “/etc/gettydefs”. Modify

this field to suit your need.

In some cases, you may need to modify the “getty default” file as well. For example,

in some UNIX systems, the “9600” symbol indicated 8-data-bit no-parity while in

1 2 ... 46 47 48 49 50 51 52 53 54 55 56 ... 101 102

Sem comentários

Moxa Technologies Moxa Smartio C168H Manual do Utilizador Página 51