Moxa Technologies EtherDevice Guia de Instalação

Moxa EtherDevice Switch EDS-205 Hardware Installation Guide Fifth Edition, August 2010 © 2010 Moxa Inc., all rights reserve

- 10 - Switching and Address Learning The Moxa EtherDevice switch has an address table that can hold up to 1K node addresses, making it suitable for

- 11 - Environmental Limits Operating Temperature -10 to 60°C (14 to 140°F) Storage Temperature -40 to 70°C (-40 to 158°F) Ambient Relative Humi

- 2 - Overview The Moxa, EDS-205 series EtherDevice™ switches are entry-level 5- port Ethernet switches that provide a cost-effective solution for y

- 3 - Panel Layout of the EDS-205 Series 5432110010P24 VAC24 VDCV+Top View1Front ViewRear View23456872 1. Heat dissipation orifices 2. Terminal bl

- 4 - Mounting Dimensions

- 5 - DIN-Rail Mounting The plastic DIN-Rail attachment plate should already be fixed to the rear panel of the EDS when you take it out of the box.

- 6 - You should also pay attention to the following points: y Use separate paths to route wiring for power and devices. If power wiring and device

- 7 - Wiring the Power Inputs The two left-most contacts of the 3-contact terminal block connector on the EDS’s top panel are used for the DC and AC

- 8 - Communication Connections The EDS-205 has five10/100BaseT(X) Ethernet ports. 10/100BaseT(X) Ethernet Port Connection The 10/100BaseT(X) ports

- 9 - LED Indicators The front panel of the Moxa EtherDevice Switch contains several LED indicators. The function of each LED is described in the ta