Moxa Technologies NE-4100 Manual do Utilizador descarregar pdf (Página 9)

Device Connectivity

10-9

[email protected]

www.moxa.com

Embedded Device Servers >

Go Ethernet with Thumb-sized Serial-to-Ethernet Solutions

MiiNePort E3 Series

The MiiNe was created to provide

manufacturers with a competitive

embedded serial-to-Ethernet solution.

The MiiNePort E3, which uses the MiiNe for its SoC, is a compact

embedded device server that has the lowest power consumption of

similar products. The MiiNe has the following features:

• Designed for serial-to-Ethernet applications

• Uses an ARM core

• Uses Moxa’s own advanced UART technology

• 2 MB Flash and 4 MB SDRAM memory built in

10/100 Mbps embedded serial device servers

Moxa’s MiiNePort E3 series embedded device servers are designed for

manufacturers who want to add sophisticated network connectivity

to their serial devices with minimal integration effort. The MiiNePort

E3 is empowered by the MiiNe, Moxa’s second generation SoC, which

supports 10/100 Mbps Ethernet, up to 921.6 Kbps serial baudrate,

a versatile selection of ready-to-use operation modes, and requires

only a small amount of power. By using Moxa’s innovative NetEZ

technology, the MiiNePort E3 can be used to convert any device with

a standard serial interface to an Ethernet enabled device in no time. In

addition, the MiiNePort E3 is a compact embedded device server with

an RJ45 connector, making it easy to fit into virtually any existing serial

device.

MOXA MiiNe

RJ45 Connector8 Pin Connector

GPIO

Timer

MAC Ethernet

SDRAM (4MB)

FLASH (2MB)

POWER System

Watchdog Timer

PHYUART

SPI

RJ45 Connector8 Pin Connector

GPIO

Timer

MAC Ethernet

SDRAM (4MB)

FLASH (2MB)

POWER System

Watchdog Timer

PHYUART

SPI

Overview

The MiiNe—Moxa’s 2nd Generation SoC

Speciﬁcations

Form Factor

Type: Pin header module

Dimensions: 35 x 52.5 x 18 mm (1.38 x 2.07 x 0.71 in)

Weight: 12 g

System Information

CPU: 32-bit ARM Core

RAM: 4 MB built in

Flash: 2 MB built in

Ethernet Interface

Number of Ports: 1

Speed: 10/100 Mbps, auto MDI/MDIX

Connector: RJ45 (magnetic)

Magnetic Isolation Protection: 1.5 KV built-in

LEDs: 10BASE-T & 100BASE-TX Link Activity

Serial Interface

Number of Ports: 1

Transmission Format: Standard TTL

Serial Communication Parameters

Data Bits: 5, 6, 7, 8

Stop Bits: 1, 1.5, 2

Parity: None, Even, Odd, Space, Mark

Flow Control: RTS/CTS, DTR/DSR, XON/XOFF

Baudrate: (non-standard baudrates supported)

MiiNePort E3: 50 bps to 230.4 Kbps

MiiNePort E3-H: 50 bps to 921.6 Kbps

Serial Signals

TTL: TxD, RxD, RTS, CTS, RST (reset circuit), GND

› IEEE 802.3af compliant PoE pass-through

› Use Moxa’s high quality and reliable second generation MiiNe

SoC

› Versatile choice of operation modes fulﬁll speciﬁc application

requirements

› Green design with extremely low power consumption

› MiiNePort NetEZ Technology makes integration incredibly easy

› Highly compact embedded device module

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 19 20

Comentários a estes Manuais

Sem comentários

Moxa Technologies NE-4100 Manual do Utilizador Página 9

Comentários a estes Manuais

Manuais e produtos relacionados com Redes Moxa Technologies NE-4100