Moxa-technologies C104H/PCI Series Manual do Utilizador descarregar pdf (Página 13)

Smartio C104H/PCI Series User’s Manual 2-1

HHaarrddwwaarree IInnssttaallllaattiioonn

The installation of the Smartio C104H/PCI Series consists of hardware and software

installation. The respective sections of the operating systems in the next chapter will

discuss more about the software installation. The hardware installation is described

in this chapter.

The no-switch-no-jumper Smartio C104H/PCI Series board hardware configuration

for IRQ number and I/O addresses is automatically assigned by the PCI BIOS.

Hence, the board MUST be plugged first before installing the software driver.

Installing the SSmmaarrttiioo C104H/PCI Series board

Step 1: Power off the PC.

Warning! Make sure your system is switched off before you start installing

any board. If you don’t, you may risk damaging your system and

the board.

Step 2: Remove the PC’s cover.

Step 3: Remove the slot cover bracket if there is any.

Step 4: Plug the Smartio C104H/PCI Series control board firmly into a free 32-

bit PCI slot.

Step 5: Fasten the holding screw to fix the control board in place.

Step 6: Replace the system cover.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 63 64

Sem comentários

Moxa-technologies C104H/PCI Series Manual do Utilizador Página 13