Moxa-technologies Moxa Smartio C168H Manual do Utilizador descarregar pdf (Página 40)

3-22 Smartio C168H/PCI User’s Manual

4. Click on the specific port and click [Port Setting] button to re-assign the

desired COM number for the Smartio C168H/PCI port mapping.

Note! Step 5 is optional, if you want to assign COM numbers to Port

manually.

5. Check Auto Enumerating COM Name check-box to assign continuous COM

numbers for subsequent ports. For example, if COM 3 is assigned to Port 1,

then COM 4 will be automatically assigned to Port 2.

Note! Step 6 and 7 are optional, if the system doesn’t require a special

performance tuning.

6. Re-assign the Rx FIFO Trigger by selecting a number from the pull-down list.

Check Set the change to all ports check-box if desire to apply this setting to

all ports.

Rx FIFO trigger levels, at 1, 4, 8 or 14 bytes, are available, and the default

value is 14 bytes.

7. Re-assign the Tx FIFO Size by selecting a number from the pull-down list.

Check Set the change to all ports check-box if desire to apply this setting to

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 73 74

Sem comentários

Moxa-technologies Moxa Smartio C168H Manual do Utilizador Página 40