Moxa Technologies EDS-G500E Guia de Instalação

 2013 Moxa Inc. All rights reserved. P/N: 1802005000020 EDS-G500E Series Hardware Installation Guide Moxa EtherDevice™ Switch First Edit

- 10 - USB Console Connection The EDS-G500E series has one USB console port (type B connector), located on the top panel. Use the USB cable (provided

- 11 - 1000BaseT Ethernet Port Connection 1000BaseT data is transmitted on differential TRD+/- signal pairs over copper wires. MDI/MDI-X Port Pinouts

- 12 - paper clip or toothpick, to depress the Reset button. This will cause the STATE LED to blink once a second. After depressing the button for 5

- 13 - “Turbo Ring V2” DIP Switch Settings DIP 1 DIP 2 DIP 3 DIP 4 ON: Enables the default “Ring Coupling (backup)” port when DIP switch 3 is already

- 14 - LED Color Status Description 5. Invalid Ring port connection. PWR1 Amber On Power is being supplied to the main module’s power input PWR1. O

- 15 - LED Color Status Description 100M (SFP) Amber On SFP port’s 100 Mbps link is active. Blinking Data is being transmitted at 100 Mbps. Off SFP p

- 16 - Dimension 79.2 x 135 x 137 mm (3.1 x 5.3 x 5.4 in) Installation DIN-rail mounting, wall mounting (with optional kit) Environmental Limits Oper

- 2 - Package Checklist The EDS-G500E is shipped with the following items. If any of these items are missing or damaged, please contact your customer

- 3 - Panel Views of EDS-G500E Series Front Panel EDS-G508E EDS-G512E-4GSFP Front Panel 1. 1000BaseT(X) LED indicator 2. 10/100BaseT(X

- 4 - Top Panel Rear Panel Top Panel 1. Reset button 2. USB console port 3. DIP switches for Turbo Ring, Ring Master, and Ring Coupler

- 5 - Mounting Dimensions Unit = mm (inch)

- 6 - DIN-Rail Mounting The metal DIN-rail kit is fixed to the back panel of the EDS-G500E series when you take it out of the box. Mount the EDS-G500

- 7 - Wall Mounting (Optional) For some applications, you will find it convenient to mount Moxa EDS- G500E series on the wall, as shown in the follow

- 8 - ATTENTION This unit is a built-in type. When the unit is installed in another piece of equipment, the equipment enclosing the unit must comply

- 9 - FAULT: The two contacts of the 6-pin terminal block connector are used to detect user-configured events. The two wires attached to the fault c