Moxa Technologies WE-2100T Series Manual do Utilizador descarregar pdf (Página 24)

3-23

www.m o x a . c o m e - m a i l : i n f o @ m o x a . c o m

Serial Device Servers

4-port Rackmount Serial Device Servers

5400 Series

NPort 5400 device servers can conveniently and transparently

connect up to four serial devices to an Ethernet, allowing you to

network your existing serial devices with only basic configuration.

Data transmission between the serial and Ethernet interfaces is bi-

directional. By using NPort device servers, you not only protect

your current hardware investment, but also allow for future

network expansion. You can both centralize management of your

serial devices and distribute management hosts over the network.

Internet Readiness for up to Four Serial Devices

NPort 5400 device servers can be used to connect different devices

for remote data polling, event handling, or data multicasting over

the TCP/IP network. Each serial port on the NPort 5400 device

server operates independently, allowing maximum versatility. For

example, port 1 can operate in Driver mode, port 2 in TCP Server

mode, and ports 3 and 4 in TCP client mode.

Independent Operation Mode for Each Serial Port

A control panel is provided on NPort 5400 device servers, with

four buttons for inputting data, configuration, and selecting the

operation mode. The control panel displays the server name,

serial number, and IP address, and can be used to enter or modify

parameters such as IP address, netmask, or gateway.

User-Friendly LCD Control Panel for Easy Installation

Redundant DC Power Inputs

NPort 5400 device servers supports redundant power sources and

provides both a DC terminal block input and a DC power jack input.

The two power inputs not only provide power redundancy, but also

allow greater flexibility for use with different applications.

Features

Easy IP address configuration with LCM (Liquid Crystal Module)

Auto-detecting 10/100 Mbps Ethernet

4 ports with selectable RS-232, RS-422, and RS-485 operation

15 KV ESD surge protection for all serial signals

TCP Server, TCP Client, UDP, and Real COM operation modes

Configuration by web console, Telnet console, and more

Supports SNMP MIB-II for network management

2 KV isolation protection for NPort 5430I

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 ... 49 50

Sem comentários

Moxa Technologies WE-2100T Series Manual do Utilizador Página 24