Moxa Technologies WE-2100T Series Manual do Utilizador descarregar pdf (Página 46)

3-45

www.m o x a . c o m e - m a i l : i n f o @ m o x a . c o m

Serial Device Servers

• Easy on-site configuration of network settings

• Simple command frame format

• Comprehensive command set for serial and network configuration

• Easily switch between software and hardware triggers

• Software reset

NE-4100 Series

100 Mbps Embedded Serial Device Servers

Overview

Stand-alone Type

(RJ45 Ethernet, NE-4110)

Stand-alone Type

(Pin header Ethernet, NE-4120)

Drop-in Type

(Dual-in-line pin header, NE-4100T)

NE-4100 embedded device servers are designed for manufacturers

who want to add sophisticated network connectivity to their products.

Any device with a standard serial interface can connect to Ethernet

with MOXA embedded devices servers in a snap. NE-4110 embedded

Typical Installation Examples

On-site Configuration with Serial Command Mode

SNMP and E-mail Alert for Event Trap and Notification

NE-4100 embedded device servers can be configured to send an SNMP trap or e-mail under the following conditions:

• Cold/warm start • Change in IP address

• Failure in password authentication • Change in password

• Change in DSR/DCD line signal

device servers provide a 10/100 Mbps Ethernet interface with ready-to-

use operation modes such as TCP Server, TCP Client, and UDP. A Real

COM driver is also included for backwards compatibility with legacy

software.

10/100 Mbps Ethernet interface, 230.4 Kbps serial interface

TCP Server, TCP client, UDP, and Real COM operation modes

Support for DHCP, BootP, Static IP, and ARP

SNMP and e-mail alert for event trapping and notification

Only 57 × 40 mm, half the size of a credit card

Low power consumption at 1.5W, with single +5V input

NE-4120S/4120A

NE-4100T

NE-4110S/4110A

Features

1 2 ... 41 42 43 44 45 46 47 48 49 50

Sem comentários

Moxa Technologies WE-2100T Series Manual do Utilizador Página 46